Puffed Sticks Machine-manufacture,factory,supplier from China

This Fried cheetos kurkure niknak processing line can use corn grits instead of the powder material to produce the irregular stick sanack. This extruder is specially designed with one screw only for such cheetos, kurkure, or niknak. After shaped from extruder, the products will be sent into the rotary sifter to take down extra grits sticky on the surface. The waste grits can be collected and used again as raw materials. So this processing line can lower down the production cost.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.

This puff snack making device can use corn, rice, and special grain powder as uncooked materials to supply right away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and appealing which is probably very famous in the marketplace.

Equipment Introduction Of Snack Products Bugles Shaper:This machine is a supporting equipment of Double screen Snack Production Extruder, which is mainly used for forming and cooling three-dimensional compound extruded food. Materials enter the Snack Products Buckles Shaper from the cooling guide frame for composite.

This puff snack making device can use corn, rice, and other grain powder as raw substances to provide immediately puffed snacks in variou shapes, along with chip, ball, ring, stick, flake, flower, and so forth. after dried and flavroed, the snacks are crispy and tasty which are very popular inside the marketplace.

This puff snack making device can use corn, rice, and distinctive grain powder as uncooked materials to deliver right away puffed snacks in variou shapes, collectively with chip, ball, ring, stick, flake, flower, and lots of others. after dried and flavroed, the snacks are crispy and attractive which might be very well-known within the marketplace.

Introduction to FLS Snack Products Cooling Conveyor Machine:FLS Snack Products Cooling Conveyor Machine is a supporting equipment for the oven, which is used to cool and transport baked materials. This machine adopts stainless steel mesh belt driven by chain to transport materials.

Equipment introductionThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles.  This complete set of equipment integrates the functions of frying, conveying, oil filtering and seasoning, and the control is accurate and reliable.  The equipment is frying while conveying, with strong continuous production without interruption, which greatly improves production efficiency and saves a lot of human resources.  Frying oil turnover rate is high.  The pot body and the conveying can be separated freely, which is

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market.

Equipment introductionSLG35-A twin-screw extrusion puffing tester is a puffed food equipment suitable for research, teaching and formula research and development, which is developed by using advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years. The characteristics of the equipment are: the screw has self-cleaning function, high efficiency of material pushing, and good shearing and homogenizing effect of material.

This method line is newly designed and produced with foreign places advanced era. it has improved the dangers of import tool which consist of huge funding and immoderate manufacturing fee. this line uses corn starch, wheat flour, potato starch as materials to deliver"bugles", "net", "potato chips" and hundreds of numerous 3-d compound extrusion meals. this line can be in assessment with those import equipments. under the same capabilities, its price is high-quality one tenth of that of import machine.

This Puff Snack Making Machine Can Use Corn, Rice, And Other Grain Powder As Raw Materials To Produce Directly Puffed Snacks In Variou Shapes, Such As Chip, Ball, Ring, Stick, Flake, Flower, Etc. After Dried And Flavroed, The Snacks Are Crispy And Tasty Which Are Very Popular In The Market. This Puff Snack Machine Is Characteristics Of Simple Opeation, Reasonable Structure, Low Consumption, And High Efficiency, Which Make It The Best Choice For Medium Factory.Schematic diagram of production line

Equipment introduction This machine is a special equipment for pasta products such as pizza rolls. The raw materials used are various starch, flour and potato whole flour. Its characteristics are: the product is beautiful in appearance and delicate in taste. The equipment has reasonable structure, high output, low energy consumption, small footprint, easy operation and maintenance.   technical parameter: Total power: 10.12KWHost power: 7.5KWRotary cutting power: 0.37KWFeeding power: 0.75KWProduction capacity: 70～80㎏/hDimensions: 1700×1000×1800mm

This puff snack making system can use corn, rice, and other grain powder as uncooked materials to deliver proper away puffed snacks in variou shapes, together with chip, ball, ring, stick, flake, flower, and plenty of others. after dried and flavroed, the snacks are crispy and attractive which is probably very famous within the marketplace.

Equipment introduction:SLG65—C type double-screw extruder technical parametersScrew diameter: Φ65mmScrew speed: 0～250rpmzProcessing capacity: 80～120kg/hTemperature control range: 0～399cMotor power: 22kwMachine center height: 1020mmDimensions: 2400×960×1800mmSLG65-C type double-screw puffing machine is a puffing food equipment suitable for my country’s national conditions, developed by using the international advanced double-screw extrusion puffing technology, combined with our company’s rich experience in puffed food technology research for many years.Host FeaturesThe host adopts a stable and

Equipment introductionDLG90 type extruder is mainly used to process all kinds of twice-puffed food and three-dimensional puffed food. The raw materials used are various starch, flour and potato whole powder.

OverviewThis complete set of equipment is widely used, and can fry various foods such as potato chips, shrimp sticks, and rice noodles. This complete set of equipment integrates the functions of frying, oil rejection, and lifting. A series of actions are controlled by PLC centralized automatic control, which makes the control accurate and reliable, greatly improves the production efficiency, and saves a lot of human resources.

Ⅰ. OVERVIEWThis machine is the auxiliary equipment of the twin-screw puffed food production line, which pulls and seals the food blanks extruded from the main machine. The shape is similar to a pillow, so it is called a pillow bag shaping machine.The machine is reasonable in design, compact in structure, easy to operate, and can meet the requirements of different parameter states of customers.Ⅱ. SCHEMATIC DIAGRAM OF THE EQUIPMENTⅢ. INSTALLATION INSTRUCTIONS1. According to the position of the production line, arrange the equipment on a flat and solid ground;2.

This Double-screw fried wheat flour snack processing line uses double screw extruding technique to replace the traditional steam booling process with high efficiency and no pollution without a boiler. The raw material can be total whear flour, or mixing with corn powder, rice powder, or others. By changing the moulds, the products can be in different shapes. After fried and flavored, the final snacks will be crispy and tasty. This line has features of continuous working, stable performance, and reasonable design.Schematic diagram of production line

Equipment introductionSLG85-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology and combined with our company's rich experience in puffed food technology research for many years.The equipment adopts stable and reliable frequency conversion speed regulation system and precise pressure sensing system, which makes the operation more convenient and accurate. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

Equipment introductionSLG72-A large-scale twin-screw extruder is a puffed food equipment developed by using foreign advanced twin-screw extrusion technology combined with our company's rich experience in puffed food technology research over the years.The equipment adopts a stable and reliable frequency conversion speed regulation system, which is more convenient to operate, and the data display is more accurate and intuitive. The spiral part adopts a specially designed screw structure such as two co-rotating, double-ended arc grooves and kneading blocks.

Popcorn process line can use the corn seed directly puffed into popcorn, and then use different flavorings like salt, cream, caramel, etc. to make various tastes. Popcorn is a kind of nor-fried, nutritious, healthy, crispy, tasteful snack, so it is one of the most favorite leisure foods of many people.Schematic Diagram of Production Line

The Fried Puffed Food Production Line Is Suitable For Extruding Flour And Other Raw Materials Through An Extruder, Rolling And Cutting Into Various Shapes Through A Compound Molding Machine, And Then Seasoning After Frying, Making Delicious Snack Foods. The Equipment Design Of The Production Line Is Reasonable And The Operation Is Simple. This Equipment Can Also Produce Products Of Various Shapes Such As Rice Crackers, Triangles, Gourd-Shaped, Small Fish Crisps, Golden Horns And So On. The Product Is Beautiful In Appearance, Crispy In The Mouth, And Rich In Nutrition.